Description

GRS series 3-piece trunk and distribution connectors are used in low power RF, video, data signals and powered broadband systems. Chassis mounting connectors are used in 5/8-24 equipment entry. A splice connector is used to join two like pieces of cable. This GRS Series connector is a three-piece auto-siezing design, featuring independent siezing of the cable’s center and outer conductors.

Gilbert GRS 3 Piece Trunk and Distribution Connector

• Independent seizing of the center conductor permits installers to physically verify the center conductor has been seized prior to tightening the back nut
• Locating the integral mandrel of the connector in the main nut provides a full view of the center conductor’s entrance into the seizing mechanism and requires minimal pull back for ease of installation
• Center conductor trim guide
• Reusable
• Part numbers are permanently marked on the connectors for easy identification

Trunk and Distribution connectors are used in low power RF, video, data signals and system power broadband systems. Chassis mounting connectors are used in 5/8 24 equipment entry through independent seizing of the center conductor, the installer can verify the center conductor has been seized prior to tightening the back nut. Placement of the integral mandrel of the connector in the main nut provides a full view of the center conductor’s entrance into the seizing mechanism and requires minimal pull back for ease of installation. The GRS connectors have a center conductor cutting guide and are reusable.